Technical Characteristics - Urmet 1092/708 Manual De Usuario

Connect the dedicated terminal pins to the mains by removing the protection cover, that must
be positioned back again after making the connections, but do not power the Power Box until
the installation has been completed.
Connect the RS485 serial line to AA BB terminal pins. (orange cable + AA / yellow cable – BB)
to the terminals of the keyboard (as indicated in the photo).
Connect the connector with the red and black wires to the 1092/709 alarm card (as indicated in
the photo).
Connect the alarm sensors cables to the alarm input terminal pins 1 and 8.
For analog cameras, connect the video cable from the video device in use (DVR, monitor, etc.)
to the female BNC connector placed inside the box, taking care to put the rubber sheath for the
protection of the metallic parts, in order to avoid that these ones make electrical contact with
internal electronic parts. For IP cameras, use the RJ45 connector instead.
Configure the various dip-switches of the 1092/709 alarm card.
Close again the Power Box with the screws previously removed to open it, taking care not to
pinch the cables inside.
Keep on installing the dome, following the instructions present on the camera package, using
the screws provided in the Power Box package.
Important
If a Dome Ref. 1092/605 is used, the external connection cable to the Power Box must be shortened up to
the indicating band on the cable as indicated in the photo.
INDICATING BAND

TECHNICAL CHARACTERISTICS

Power supply input: ........................................................................................................... 230Vca 50Hz 50VA
Power Output for Speed Dome: ................................................................................................. 24Vca – 2,5A
Working temperature range: .......................................................................................................... -20 ÷ +60°C
Storage temperature range: .......................................................................................................... -30 ÷ +60°C
Protection grade: ....................................................................................................................................... IP66
Dimensions (L x H x D):..................................................................................................... 165 x 140 x 95 mm
Weight: ................................................................................................................................................. 2150gr.
Note
Technical characteristics may be modified without notice.
14
DS1092-228