Kohler K-1018 Guia De Instalacion página 13

16. Install the Receptor
Assemble and install the drain according to the manufacturer's instructions.
Move the shower receptor into the framing pocket.
Make sure the unit is level on all three sides. If the unit is not level, the back of the base will need
to be shimmed as required to level the unit.
Predrill the side and back nail-in flanges on the stud centers around the receptor. Do not nail the
receptor in place at this time.
Kohler Co.
Receptor
Back View of the Receptor on a Subfloor
Install the receptor with the
drain fitting attached
Leveling blocks/shims under the receptor
Shims
13
Subfloor
1024937-2-C