Tabla de contenido
Publicidad
PROBLEM SOLVING
This appliance was inspected thoroughly and was in good operating condition when it
was shipped from the factory. If a minor problem occurs, it usually can be solved quite
easily when the cause is found. Therefore, this checklist is provided for your
convenience.
PROBLEM
POSSIBLE CAUSE
1.
Not properly plugged into
wall outlet.
Cleaner W on't
2.
No electricity in wall outlet
Run
3.
On/Off switch not turned on.
4.
Motor thermostat tripped.
5.
Blown fuse/tripped breaker.
1.
Full or clogged dust cup.
2.
W rong pile height setting.
3.
Clogged nozzle or dust inlet
port.
4.
Clogged hose.
5.
Broken belt.
Cleaner W on't
6.
Hose not inserted fully.
Pick Up
7.
Dirty filters.
8.
HEPA filter needs cleaning
or replacing.
9.
Debris screen needs
cleaning.
10. Clog somewhere in air path.
Cleaner Picks
Up Moveable
1.
W rong pile height setting.
Rugs Or Pushes
Too Hard
1.
Broken drive belt
Agitator Does
2.
Belt(s) installed incorrectly.
Not Turn
3.
Broken tension belt.
1.
Rotating brush, turbine or
Air Driven Turbo
elbow obstructed.
Brush Does Not
2.
Belt broken.
Rotate Or
3.
Hose obstructed.
4.
HEPA filter or debris screen
Rotates Slowly
clogged.
Air Flow
1.
Attachment use restricts air
Restricted W ith
flow.
Attachment Use
2.
New carpet debris clogging
air path.
Sound Changes
All manuals and user guides at all-guides.com
POSSIBLE SOLUTION
1.
Plug in firmly.
2.
Reset circuit breaker or
replace fuse.
3.
Push on/off switch to on.
4.
Reset motor thermostat.
5.
Check fuse or breaker.
1.
Clean dust cup.
2.
Adjust setting.
3.
Remove obstruction.
4.
Remove obstruction.
5.
Replace belt.
6.
Push hose in securely.
7.
Clean / change filters
8.
Clean or replace HEPA
Filter.
9.
Clean debris screen.
10. Clear blockage.
1.
Adjust setting.
1.
Replace drive belt.
2.
Check belt(s) changing and
agitator cleaning.
3.
Replace tension belt.
1.
Clear obstructions.
2.
Call 1 (800) 798-7398.
3.
Clear obstruction.
4.
Clean HEPA filter or debris
screen.
1.
Check attachment.
2.
Remove obstruction.
14
FAMILIARISATION AVEC VOTRE ASPIRATEUR VERTICAL
1.
Poignée pliante
2.
Déclencheur de la poignée pliante
3.
Boyau flexible
4.
Sélecteur tapis-plancher
5.
Déclencheur de la poignée
6.
Couvercle du filtre d'échappement.
7.
Surveille-filtre Intelli-Sense
MC
8.
Support du cordon d'alimentation
avec dispositif de relâche rapide
9.
Cordon d'alimentation
10. Bouton de relâche de la portière de
retenue
11. Trappe d'admission
12. Poignée du boyau
13. Tube télescopique
14. Commutateur Arrêt/silencieux/
normal (Off/Quiet/Normal)
Spécifications techniques
Tension:
120V, 60Hz.
Demande:
12 Ampères
Remarque: Les illustrations peuvent différer de l'unité actuelle.
15. Brosse turbo actionnée à l'air
16. Poignée de transport
17. Poignée de la coupelle à
poussière
18. Couvercle de la coupelle à
poussière
19. Coupelle à poussière
20. Brosse à épousseter
21. Brosse pour divans
22. Suceur plat
23. Lampe de tête au xénon
24. Régleur de la hauteur du
tapis
25. Connecteur du boyau
26. Chariot pour outil
35
Publicidad
Tabla de contenido
