Changing Channels; Adjusting The Volume; Adjusting The Picture; Adjusting The Sound - Dynex DX-LCD37-09 Guia Del Usuario

14
2 Press or to select LANGUAGE, then press ENTER.
3 Press or to select English, Español, or Français, then
press ENTER.
4 Press MENU to close the menu.

Changing channels

To change channels:
• Press CH or CH to select a channel in the channel list.
• Press the number buttons for the channel you want, then press
ENTER or wait a few seconds.
• Press RECALL to go to the previous channel.
• To select a digital sub-channel, press the number button for the
main channel, press —, then press the number button for the
sub-channel.
Most digital TV channels have more than one channel. The main
channel carries the signal for the main TV program. The
sub-channels carry signals for additional or alternate
programming, such as a radio or news broadcasts.
For example, if the main channel number is 8, the sub-channel
number might be 8-1, 8-2, or 8-3.
Note: No Signal appears when the sub-channel program ends.

Adjusting the volume

To adjust the volume:
• Press VOL or VOL to increase or decrease the volume. The
Volume bar appears at the bottom of the screen.

Adjusting the picture

To adjust the picture:
1 Press MENU. The on-screen menu opens.
Language Language
Select the language for setup display. English
Elija el idioma de ajuste. Español
Français
Sélectionner langue écran config.
2 Press or to select PICTURE, then press ENTER.
Picture
Picture
Picture Mode
Reset Settings
Color Temp.
Energy Saving
3 Press or to select the setting you want to adjust, then press
ENTER. You can select:
• Picture Mode—Press
Dynamic, Movie, or News, then press ENTER.
• Brightness—Press
brightness.
• Contrast—Press
contrast.
• Color—Press
• Tint—Press
• Sharpness—Press
sharpness.
• Reset Settings—Press ENTER to reset the picture settings
to the factory default.
• Color Temp.—Press
Warm, then press ENTER.
• Energy Saving—Press
brightness of the backlight.
4 Press MENU to close the menu.

Adjusting the sound

To adjust the sound:
1 Press MENU. The on-screen menu opens.
2 Press or to select SOUND, then press ENTER.
Sound
Sound
Treble
Bass
Surround
Reset Settings
3 Press or to select the setting you want to adjust, then press
ENTER. You can select:
• Treble—Press
• Bass–Press
Using your TV
Dynamic
Brightness
Contrast
Color
Tint
Sharpness
Neutral
or to select Standard,
or to decrease or increase the
or to decrease or increase the
or to adjust the color.
or to adjust the tint.
or to decrease or increase the
or to select Cool, Neutral, or
or to decrease or increase the
Off
or to adjust the treble.
or to adjust the bass.
30
60
36
0
0
Off
0
0