Tv Components; Front And Side; Back - Dynex DX-LCD37-09 Guia Del Usuario

6

TV components

Accessories
• Remote control
• AA batteries (2)
• User guide
Note: Cables are not supplied. You can purchase cables at most electronics
stores.

Front and side

# Component
1 Remote control
sensor
2 POWER
3 INPUT
4
CHANNEL
5
CHANNEL
6
VOLUME
7
VOLUME
8 MENU
POWER
INPUT
CHANNEL
VOLUME
MENU
Description
Receives signals from the remote
control. Do not block.
Press to turn your TV on or off.
Press to select the video input source.
When the on-screen menu is open,
press to confirm selections.
Press to tune to the next higher
channel in the channel list. For
information about creating the
channel list, see "Scanning for
channels" on page 12.
When the on-screen menu is open,
press to move up.
Press to tune to the next lower
channel in the channel list. For
information about creating the
channel list, see "Scanning for
channels" on page 12.
When the on-screen menu is open,
press to move down.
Press to increase the volume.
When the on-screen menu is open,
press to move right .
Press to decrease the volume.
When the on-screen menu is open,
press to move left.
Press to open the on-screen menu.

Back

# Jack
1 PC-IN
2 HDMI 2 IN
3 HDMI 1 IN
4 AUDIO IN L/R
5 AUDIO OUT L/R
6 DIGITAL AUDIO OUT
(COAXIAL)
7 ANT. IN
8 Power cord
TV components
Description
Connect a computer with a VGA
cable to this jack.
Connect an HDMI device to this jack.
Connect an HDMI or DVI device to
this jack. To connect an DVI device,
you need to connect an HDMI-DVI
cable, and connect an audio cable to
the AUDIO IN L/R jacks.
If you connect a DVI device to the
HDMI 1 IN jack, connect the DVI
device's audio out jacks to these
jacks.
Connect an analog audio device to
these jacks with an RCA cable.
Connect a digital audio device to this
jack.
Connect an antenna or cable TV to
this jack.
Plug into a power outlet.