Attaching The Fan Blades - Progress Lighting AirPro P250028 Manual De Instalación

Finishing the Fan
Installation
1. Move fan into position over the mounting
bracket and secure with the 4 screws provided.
(Fig. 8)
Mounting
Bracket

Attaching the Fan Blades

1. Attach the blades to the blade arms using three
decorative nuts, screws and fiber washers as
shown in Figure 9. Start a screw into the blade
arm, do not tighten. Repeat for the 2 remaining
screws and washers.
2. Tighten each screw securely starting with the
center screw. Make sure the blade is straight.
3. Fasten the blade assembly to the motor using
the motor screws provided.
Screws
4. Repeat these steps for the remaining blades.
WARNING:
PERSONAL INJURY, DO NOT BEND THE BLADE
WHILE INSTALLING, BALANCING THE BLADES,
OR CLEANING THE FAN. DO NO INSERT
FOREIGN OBJECTS BETWEEN ROTATING FAN
BLADES.
Figure 8
TO REDUCE THE RISK OF
Blade arm
Screws
Screws
Fiber
washers
Blade
Figure 9
6.