English
Product description
A touch screen (A) enables flexible, country-specific adaptation of the user interface via virtual but-
tons and a variable display window. All system messages are displayed on the central LCD display.
22 fixed buttons (B) for standard entries are positioned around the touch screen. 11 LEDs (C) indi-
cate the system's operating status.
The integrated key switch (D) with 2 switch settings is freely programmable, e.g. for switching bet-
ween day/night mode and connecting/disconnecting for local alarm signaling.
The control unit has 2 CAN interfaces (CAN1 / CAN2) to enable system networking (bus or loop
structure). 2 signal inputs (IN1 / IN2) and 3 additional connections (Ethernet, USB, RS232) are
also available. On the back are 3 rotary switches for addressing, 6 DIP switches for configuring and
a RESET button for resetting the system.
C
CAN-Bus
D
IN1 / GND / IN2
2 x CAN1
Address setting
Reset
Configuration
Technical Specification
LCD display /
touch screen
Operating and display elements 22 buttons, 1 key switch, 11 LEDs, 1 RESET button
Interfaces
Perm. length of CAN cable for
system networking
Input voltage
PRS 0002 A power supply
Maximum current consumption - standby operation: 120 mA at 24 V DC
Permissible operating temp.
Permissible storage temp.
Dimensions (H x W x D)
Weight
A
2 x CAN2
LCD display with 320 x 240 pixels
Touch screen with 127.5 mm x 170 mm (5.0 in. x 6.7 in.) active
surface
CAN1, CAN2, Ethernet 100BaseTX, USB
, RS232
ble length)
(max. 3 m (10 ft) cable length),
puts (IN1/IN2)
L
= 1000 m, depending on topology and cable type confi-
max
guration, see networking, starting page 27
20 V DC. . . 30 V DC
+5 V DC ±4.5% / max. 500 mA
- during an alarm: 205 mA at 24 V DC
-5 °C. . . 50 °C
-20 °C. . . 70 °C
190 mm x 404 mm x 60 mm (7.5 in. x 15.0 in. x 2.4 in.)
approx. 2,000 g (4.4 lb)
8 / 40
B
RS232
USB Host
USB Device
Ethernet (RJ45)
(max. 3 m (10 ft) ca-
BDL-F01U029053 / A3.ml
GB
CAN-Bus
Protective
ground
2 signal in-
ST - FIR / PRM1 / deh