Technical Specifications - Chauvet RB-X200CM Guía De Referencia Rápida

Mounting
Before mounting this product, read the
Mounting Diagram
Eye Bolt Installation
1. Remove cotter-pin from set-pin by pressing the safety button in the middle of the handle.
2. Remove set-pin from eye bolt.
3. Align the eye bolt over one of the pre-cut holes on the rig bar.
4. Insert the set-pin to secure the eye bolt to the rig bar
5. Re-insert the cotter-pin bac into the set-pin
Mounting Procedure
1. Insert alignment hanger into the alignment hole and push panel forward.
2. Push both male Speego into female Speego connections and turn clockwise to tighten panel to the rig bar.
3. Reverse the steps above to remove panel from rig bar. Push tab on female Speego connection to release male
Speego.
The alignment hanger on the PVP X6IP is designed to temporarily hold the weight of the panel to
allow the user to properly align and tighten the panel into place

Technical Specifications

Dimensions and Weight
Length
82.20 in (2088 mm)
Load Capacity
920 lb (417 kg)
Note: Dimensions in inches are rounded.
Ordering
Product Name
RB-X200CM
RB-X200CM QRG Rev. 1
QUICK REFERENCE GUIDE
Safety Notes, as well as those for the attached products.
Width
5.12 in (130 mm)
Item Name
RBX200CM
Height
6.46 in (164 mm)
Recommended Shackle
5/8"
Item Code
23111033
EN
Weight
40 lb (18.1 kg)
UPC Number
781462213824
2