Saivod SAP 916 Manual De Usuario página 80

Install window frame
Note:
If the inner width of window is below 28"(718mm), please remove the adju-
sting plate from window frame and then cut the window frame to make its width the
same as the width of window.
adjusting plate
1. Clamp joint C into the inner side of window frame along the direction of arrow.
2. Fix the protective grille on joint C with 2 screws.
window frame
joint C
3. Fix the support on the outer side of window frame with 2 nuts, spring washer,
washer and bolt.
4. Fix the rain shield on the support with 2 nuts, spring washer, washer and bolt.
window frame
nut
washer bolt
spring washer
nut spring washer
protective grille
screw
support
bolt
rain shield
washer
cut
screw