Saivod SAP 916 Manual De Usuario página 72

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Clean and Maintenance
Clean heat-removal pipe
Remove the heat-removal pipe from air conditioner, clean and dry it , and then
reinstall it. (For the method of installation and removal method, please refer to the
instruction for "Install and Remove Heat-removal Pipe").
Checking before use-season
1. Check whether air inlets and air outlets are blocked.
2. Check whether plug and socket are in good condition.
4. Check whether batteries is installed in remote controller.
6. Check whether heat-removal pipe is damaged.
Checking after use-season
1. Disconnect power supply.
3. Remove dust and sundries on the air conditioner.
4. Eliminate accumulated water in chassis (refer to the section of "discharge method"
for details).
5. Check whether window bracket is damaged or not. If yes, please contact dealer.
Long-time storage
If you don't use the air conditioner for a long time, please maintain it by following
steps for good performance:
disassembled.
Notice for recovery
local recycle bin.
consultant service center for the correct disposal method.

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido