Resetting To Factory Default Settings - WISEUPSHOP WIFI27 Guía Del Usario

VII. Resetting to Factory Default Settings
If for any reason the robot camera stops working or isn't working properly, you can
reset the camera to restore it back to normal operation.
Operation: When the camera is powered on, use a pin to press and hold the Reset
Button for 10 seconds to reset all settings to factory default. The camera will say
"reset to default settings" and restart automatically with default settings in 10 sec-
onds.
VIII. Changing Administrator & Visitor Password
8.1. Launch the application.
8.2. Tap the gear icon and go to "Security settings" page.
8.3. Choose "Admin password". On the next page, input the default password
"123", then enter your new password which must contain 6-30 characters of letters
and digits. Finally, tap "Save" to confirm the change.