Kohler Kathryn K-3020 Guia De Instalacion página 8

Bolt
Nut
6. Attach Frame to Wall
- Attach frame to the wall clips using bolts and nuts provided. Do not
fully tighten the bolts.
- Make sure frame is level side to side. Adjust leg levelers as needed.
- Make sure the frame is level front to back. Adjust bolts as required.
- Fully tighten bolts to the wall clips.
7. Install Faucet and Lavatory Clips
- Install faucet to tabletop according to manufacturers instructions. It
is recommended that hoses also be installed to the faucet fittings.
Hoses will be more difficult to install later.
- Loosely install the four lavatory mounting clips that are provided
with the leg assembly (discard the clips provided with the lavatory).
The curved end of the clips should face up. Do not fully tighten the
bolts. Slide the clips to the side so they do not impede the lavatory
when it is lifted into place.
A
1013243-2-
Viewed
from
bottom
8
Lavatory
Clips
Kohler Co.