Patek Philippe CALIBER 324 S QA LU 24H Manual Del Usuario página 18

18
date correction
Proceed as follows to correct the date:
1. MAKE SURE to set the date to the first day of
the month.
2. First, correct the month with the push piece at
2 o'clock as described below.
3. Then, correct the date by repeatedly actuating
the push piece at 4 o'clock until the current
date is displayed.
month correction
To correct the month, actuate the correction push
piece at 2 o'clock as many times as needed to
display the current month.
day of week correction
To correct the day of the week, actuate the
push piece at 10 o'clock as often as needed to
display the correct day.
-
moon phase correction
The moon-phase display advances in the morn-
ing. Its mechanism is active between 9 and 11
a.m. Each time the push piece at 8 o'clock is
actuated, the moon-phase disk will advance
by one day. To begin the correction proce-
dure, advance the moon-phase disk until a full
moon is displayed in the middle of the aperture.
Consult a moon-phase calendar or visit www.
patek.com (click on
Complications
how many days have elapsed since the last full
moon (except the day on which you correct the
display). To correctly set the moon-phase display,
press the push piece as many times as the number
of days that have elapsed since the last full moon.
›
Collection
›
Moonphase indicator) to find out
›
Movements-