CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
General safety instructions
WARNING: Read the warning instructions
that follow before you use the product.
•
Incorrect or careless use of a hedge trimmer can
turn it into a dangerous tool that can cause serious
or even fatal injury. It is extremely important that you
read and understand the contents of this operator's
manual.
•
This product produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical
implants to consult their physician and the medical
implant manufacturer before operating this product.
•
Overexposure to vibration can lead to circulatory
damage or nerve damage in people who have
impaired circulation. Contact your doctor if you
experience symptoms of overexposure to vibration.
Such symptoms include numbness, loss of feeling,
tingling, pricking, pain, loss of strength, changes in
skin color or condition. These symptoms normally
appear in the fingers, hands or wrists. The risk
increases at low temperatures.
•
If you encounter a situation where you are uncertain
how to proceed you should ask an expert. Contact
your dealer or your service workshop. Avoid all
usage which you consider to be beyond your
capability.
•
Keep in mind that the operator is responsible for
accidents or hazards occurring to other people or
their property.
•
Never allow anyone else to use the product without
first ensuring that they have understood the contents
of the operator's manual.
•
Never allow children to use or be in the vicinity of the
product. As the product is equipped with a
springloaded stop switch and can be started by low
speed and force on the starter handle, even small
children under some circumstances can produce the
force necessary to start the product. This can mean
a risk of serious personal injury. Therefore remove
the spark plug cap when the product is not under
close supervision.
•
Store the product out of reach of children.
•
Never use the product if you are tired, if you have
drunk alcohol, or if you are taking medication that
4
could affect your vision, your judgement or your co-
ordination.
•
Never use a product that is faulty. Carry out the
checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. Refer to instructions under the
heading Maintenance.
•
Never use a product that has been modified in any
way from its original specification.
Safety instructions for operation
WARNING: Read the warning instructions
that follow before you use the product.
•
Never use the product in extreme weather conditions
such as severe cold, very hot and/or humid climates.
•
Faulty blades can increase the risk of accidents.
•
Ensure that no-one comes closer than 15 m / 50 ft
while you are working.
•
Observe your surroundings and make sure that there
is no risk of people or animals coming into contact
with the cutting equipment.
•
Inspect the working area. Remove any objects that
could be thrown out.
•
Always ensure you have a safe and stable working
position.
•
Never leave the product unsupervised with the motor
running.
•
Make sure that your hands and feet do not come
near the cutting unit when the engine is running.
•
If anything jams in the blades while you are working,
switch off the engine and wait until it has stopped
completely before cleaning the blades. Disconnect
the HT lead from the spark plug. Refer to
examine the blades on page 12 .
•
When the engine is switched off, keep your hands
and feet away from the cutting unit until it has
stopped completely.
•
Watch out for stumps of branches that can be thrown
out during cutting.
•
Listen out for warning signals or shouts when you
are wearing hearing protection. Always remove your
hearing protection as soon as the engine stops.
•
Never work from a ladder, stool or any other raised
position that is not fully secured.
•
Always use both hands to hold the product. Hold the
product in front of your body.
•
If any foreign object is hit or if vibrations occur stop
the product immediately. Disconnect the HT lead
from the spark plug. Check that the product is not
damaged. Repair any damage.
•
Ensure that the spark plug cap and ignition lead are
undamaged to avoid the risk of electric shock.
•
Check that all nuts and screws are tight.
To
906 - 002 - 19.03.2019