auna Milano 10034605 Manual Del Usuario página 23

USB charging
• When the speaker is on, you can charge iPhones and Android phones
simultaneously via the USB ports (2.1 A / 1 A).
• If the speaker is turned off but connected to the AC adapter, you can
charge iPhones and Android phones simultaneously via the USB ports
(2.1 A / 1 A).
• If the speaker is turned off and not connected to the AC adapter, no
external devices can be charged from the USB port.
Wireless charging
The charger coil of the wireless charger (only for mobile phones that
support the Qi wireless charger standard) must point to the wireless charger
mark located in the middle of the table. The speaker must either be turned
on or connected to the AC adapter, otherwise it cannot charge the device.
Once the unit is connected and uncharged, the „di" signal will sound.
Low battery and charging
• If the battery capacity is low, the „Low Battery" message will sound to
remind the user that the speaker needs charging. If you do not charge
the speaker, it will automatically turn off.
• After connecting the AC adapter to the wall outlet, the red LED light on
the back of the speaker lights up while the speaker is charging. When
the battery is fully charged, the red LED goes out.
EN
23