How To Use; Filling The Water Tank; Using Your Iron - Black+Decker anti-brillo D3502 Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HOW TO U SE
This product is for household use only.
GE TT IN G STARTE D
Remove the plastic band around the power plug and all labels, tags
and stickers attached to the body, cord, or soleplate of the iron.
Remove and save literature.
Please note that water droplets may still be visible in the tank at the time
of purchase. This is from the individual quality tests done to ensure that
every iron meets our high standards for product performance.

FILLING THE WATER TANK

Tip: This iron is designed to use normal tap water. Do not use water processed
through a home softening system. If your water is very hard, you can use a
mixture of 50% tap water and 50% distilled water to avoid build-up. It is not
recommended to use water with perfumes or scented additives.
1.
Unplug the iron.
2.
Hold the iron with the front raised.
3.
Open the water inlet cover.
4.
Pour slowly, to let the air in the reservoir escape, otherwise you'll cause
an air lock and the water will overflow.
5.
Don't fill past the max marking or water will escape in use.
6.
Wipe up any spills.
4.
To refill at any time during the ironing process, unplug the iron and
follow the above procedure.

USING YOUR IRON

The temperature of your iron is safe to use on all ironable fabrics and garments.
Dry Ironing
If you're going to be dry ironing for 20 minutes or more, empty the reservoir
first to avoid spontaneous bursts of steam.
1.
Put the plug into the power outlet.
2.
Set the steam control to
3.
The light will slowly pulse on and off as your iron heats up. When
your iron is ready to use, the light will stay on.
Steam Ironing
1.
Set the steam control to the setting you want,
= high steam.
2.
The light will slowly pulse on and off as your iron heats up. When
your iron is ready to use, the light will stay on.
.
5
= low steam,

Publicidad

Tabla de contenido
loading

Tabla de contenido