Sony SU-WL11 Instrucciones página 5

Be sure to assemble the bracket
properly by following the steps
explained in this instruction
manual.
If any of the screws are loose or fall out, the TV
may fall, and cause bodily injury to someone or
damage to the TV.
Be sure to tighten the bolts and
screws securely in the designated
position.
If you fail to do so, the TV may fall and cause
bodily injury to someone or damage to the TV.
Be careful not to subject the TV to
shock during installation.
If the TV is exposed to shock, it may fall or break
apart. This may cause injury.
Be sure to install the TV on a wall
that is both perpendicular and flat.
If you fail to do so, the TV may fall and cause
injury.
After proper installation of the TV,
secure the cables properly.
If people or objects get tangled in the cables, this
may result in injury.
Do not allow the Power Cord or the
Cables to be pinched.
If the Power Cord or one of
the cables is pinched
between the unit and the
wall or is bent or twisted
by force, the live wires of
the cord or cable may be
exposed and cause a short
circuit or a break in the
cord or cable. This may
cause fire or electric shock.
Be careful not to hurt your hands
or fingers during installation.
Be careful not to hurt your hands or fingers when
installing the Wall-Mount Bracket or the TV.
The screws needed to secure the
Wall-Mount Bracket to the wall are
not supplied.
Use the appropriate screws for the wall material
and structure when mounting the Wall-Mount
Bracket.
US
5