Sony SU-WL11 Instrucciones página 6

Before installation
Before installation, be sure to see the
Leaflet (Installing the Wall-Mount
Bracket to the TV) supplied with the
TV.
Installation
Step 1:
Check the parts
To install the Wall-Mount Bracket, have
ready eight M4×20 mm (
screws (or screws of an equivalent size)
that are appropriate for the wall. Use an
appropriate screwdriver for the chosen
screws. Never use the supplied screws to
fix the bracket to the wall. Open the
package and check all the parts below are
included in the package.
Bracket A (1)
Bracket B (1)
Bracket E (1)
6
13
/ inches)
16
Bracket C (3)
(0°, 5°, 10°)
Bracket D (1)
Screw (6)
(with washer)
Locking rod (1)
Step 2:
Decide the location
Decide where you want to install the TV.
Then, place bracket A on the installation
location and mark the four screw holes on
the wall using a pencil. Never use the
supplied screws to fix the bracket to the
wall.
Before marking the location of the holes, make
sure that the distance between the upper edge
of bracket A and the ceiling is
inches) or more, and that between the side
edge of bracket A and the side wall is
inches) or more.
(9 27 /
32
Before installation, refer to the Leaflet
(Installing the Wall-Mount Bracket to the TV)
supplied with the TV.
The Leaflet (Installing the Wall-Mount Bracket
to the TV) includes the installation dimensions
table. Refer to the table to decide where you
want to install the TV.
Ceiling
Bracket A
15 cm (5
25 cm
(9 27 /
32
inches)
or more
Notes
• Attach bracket A level with the floor.
• The wall should be capable of supporting a
weight of at least four times the TV weight.
Before installing, confirm that the wall has
sufficient strength to support the TV and the
Wall-Mount Bracket. If the wall does not
have sufficient strength, reinforce it
adequately before installing.
29
15 cm (5 /
25 cm
29 / inches) or more
32
Mark this
portion using
a pencil.
Wall
32