Sony SU-WL11 Instrucciones página 9

Step 6:
Secure the TV to the
wall
Hook bracket E on bracket A.
1
Bracket
E
Notes
• Hold the TV firmly. Be especially
careful when you secure the TV in a
high place.
• Do not release the TV until you
confirm that bracket E is firmly
secured to bracket A in three
locations.
Insert the locking rod.
2
The locking rod can be inserted from
either side. The illustration below
shows an example of how to insert the
locking rod from the right side.
1 Insert the longer side of the
locking rod into the holes on
bracket E.
2 Insert the curved side of the
locking rod into the hole on
bracket A. Hold and press
the locking rod at part
pass its end through the
hole.
3 Turn the locking rod until it
stops to secure it in place.
Bracket A
wall
to
Note
To prevent the locking rod from falling
out of the brackets, the space between
both ends of the locking rod is greater
than that between the holes on the
brackets. Hold and press the locking
rod at part so that it can pass
through the holes.
CAUTION
If the TV is lifted up when the locking
rod is not installed properly, the TV
may fall off the Wall-Mount Bracket
and cause serious injury.
Be sure to insert and secure the locking
rod in place.
1
Locking rod
3
2
US
9