Maintenance Plan; Cleaning; Disposal - HOLZMANN MASCHINEN DKS 21PRO Manual De Instrucciones

1
15 MAINTENANCE
Perform all maintenance machine settings with the machine
being disconnected from the power supply!
Serious injury due to unintentional or automatic activation of
the machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a
pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Store the machine in a closed, dry location.
15.1

Maintenance plan

After each workshift:
 remove wood chips and dust from the device
After 20 hours of operation:
 Lubricate bearing and shaft
Open the lubrication hole and lubricate the bearing and
the shaft
15.2

Cleaning

The usage of certain solutions containing ingredients damaging metal surfaces as
well as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution
15.3

Disposal

Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local dealer
for a replacement unit, the latter is obliged to exchange your old.
HOLZMANN MASCHINEN GmbH
ATTENTION
NOTICE
www.holzmann-maschinen.at
NOTICE
PREFACIO
Página 28
DKS 21PRO