HOLZMANN MASCHINEN DKS 21PRO Manual De Instrucciones página 29

1
16 TROUBLE SHOOTING
BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, DISCONNECT THE
MACHINE FROM THE POWER SUPPLY.
Trouble
Motor does not run
Saw blades break
Vibrations
MANY POTENTIAL SOURCES OF ERROR CAN BE CLEARED BY THE EXPERTLY CONNECTION
TO THE ELECTRICITY GRID.
Should you in necessary repairs not able to properly to perform or you
have not the prescribed training for it always attract a workshop to fix the
problem.
HOLZMANN MASCHINEN GmbH
Possible cause
 Switch defective
 Power supply is off
 Fuse is defective
 Electric contactor is defective
 Main cable defedtive
 Tension incorrectly set
 To much pressure
 Workpiece feeding
 Machine incorrect mounted
 Motor is loosen
 Working table is loosen
www.holzmann-maschinen.at
 Repair switch
 Repair power supply
 Change fuse
 Repair or change electric
contactor
 Chainge main cable
 Set correct tension
 Feed the workpiece more slowly
 Avoid exerting pressure from
the side
 Mount machine correct
 Tighten the motor screws
 Tighten the fixing screw
NOTICE
PREFACIO
Solution
Página 29
DKS 21PRO