Maxon 289493-01G Instrucciones De Instalación página 11

NOTE: Change the taillight mounting fasteners before installing the liftgate. The new
fasteners will allow both taillight lenses to be removed after the liftgate is in-
stalled.
1. Remove 2 original taillight screws
and RH taillight lens from pickup bed
(FIG. 11-1). Repeat for LH taillight
lens.
2. Ensure all tailgate mounting fasteners
have been removed (FIG. 11-1).
3. Reinstall the LH and RH taillight lenses
(FIG. 11-1) without using the original
fasteners.
4.
through taillight clip (Kit item) for each
tailight lens (FIG. 11-1). Then, fasten
clip to the tailgate cable catch bolt hole
on the RH and LH side of opening in
the pickup bed (FIG. 11-1).
5. Press clip against each taillight lens and
tighten bolt (FIG. 11-1).
LIFT CORPORATION Sht. 11 of 54 DSG#
CHANGING TAILLIGHT MOUNTING
M-14-26
TAILLIGHT
CLIP
M8 X 12
FLANGE
BOLT
INSTALLING TAILLIGHT MOUNTING CLIPS
Rev. E Date: 08/13/19
RH
TAILLIGHT
LENS
TAILLIGHT
SCREW
(REMOVE)
PRESS CLIP,
TIGHTEN BOLT
TAILLIGHT
SCREW
(REMOVE)
FIG. 11-1