Maxon 289493-01G Instrucciones De Instalación página 12

BOLTING ON SPARE TIRE RELOCATOR BRACKET
NOTE: The spare tire relocator bracket provides access to the spare tire hoist after the
liftgate is installed.
1. Position relocator bracket on the
inside lip of the pickup bed as shown
in FIGS. 12-1 & 12-2. Ensure the
spare tire access tube extends
through the large hole in the new
bracket.
CAUTION
Before drilling holes in the pickup
bed, ensure there are no obstruc-
tions to drill bit or items behind
sheet metal that could be damaged.
2. Use relocator bracket as a tem-
plate to mark and drill 2 holes, for
1/4"-20 screws, on the pickup bed
(FIGS. 12-1 & 12-2).
3. Screw the relocator bracket to
pickup bed (FIGS. 12-1 & 12-2)
with two 1/4"-20 screws and lock
nuts (Kit items).
4. Before installing liftgate, ensure
plastic plug is removed from spare
tire access hole on rear of the
liftgate.
LIFT CORPORATION Sht. 12 of 54 DSG#
M-14-26
RELOCATOR
BRACKET
HOLE FOR
1/4"-20 SCREW
& LOCK NUT
(2 PLACES)
6-3/8"
POSITIONING RELOCATOR BRACKET
(FOR LONG BED)
FIG. 12-1
RELOCATOR
BRACKET
HOLE FOR
1/4"-20 SCREW
& LOCK NUT
(2 PLACES)
5-1/4"
POSITIONING RELOCATOR BRACKET
(FOR SHORT BED)
FIG. 12-2
Rev. E Date: 08/13/19
23"
26"