Gear; Cleaning And Lubrication - Husqvarna 226HD60S Manual De Instrucciones

Gear

There is a grease nipple on the gearbox. Use a grease
gun to top up with grease. This should be carried out after
approximately every 50 working hours. Use Husqvarna
special grease.
Pump in grease until clean grease emerges to the blades.

Cleaning and lubrication

Clean any resin and plant residue from the blades using
cleaning agent before and after using the machine.
Lubricate the blade bars with special grease before long
periods of storage.
IMPORTANT! Use only HUSQVARNA replacement
parts. Use of other brands of replacement parts can
cause damage to your unit or injury to the operator or
others. Your warranty does not cover damage or liability
caused by the use of accessories and/or attachments
not specifically recommended by HUSQVARNA.
18 – English
MAINTENANCE
1158462-49 Rev. 2 2016-11-14