Manual Station Selection - SILVER CREST SRH 5 C3 Instrucciones De Uso E Indicaciones De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 340
Selecting stations
In DAB+ radio mode, press the TUNE+ button
to select a DAB+ radio station from the station list.
Alternatively, after pressing the TUNE+ button
you can use the VOLUME |
station from the station list.
Press the VOLUME |
selected station.

Manual station selection

NOTE
To set stations manually, you need to know the multiplex number or the
frequency of the DAB+ radio station you want to tune in, so that you can
select it from the station list.
The Manual tune function allows you to adjust the signal strength and thus the
reception quality of a DAB+ radio station.
In DAB+ radio mode, press the INFO / MENU button 
2 seconds to call up the DAB settings menu.
Press the TUNE+ 
VOLUME |
on the display
Press the VOLUME |
The display
radio stations. The station name of receivable DAB+ radio stations is
displayed next to the frequency.
Press the TUNE+
Press the VOLUME |
The display
Move the telescopic aerial
improve the signal strength of a station.
Pay attention to the bars showing the signal strength. For optimum signal
strength, the bars should be as high as possible.
SRH 5 C3
  ENTER / SCAN
8
7
or TUNE− 
ENTER / SCAN dial 
1
.
 ENTER / SCAN dial 
1
shows the multiplex numbers and frequencies of the DAB+
8
7
or TUNE−
 ENTER / SCAN dial 
1
shows the station signal strength as a bar graph.
0
or change the location of the device to
8
or the TUNE– button
8
or the TUNE– button
dial 6
ENTER / SCAN
dial 6
to play back the
4
button several times or turn the
6
until Manual tune appears
6
to confirm the selection.
button to select a station.
6
to confirm the selection.
7
7
,
to select a
for about
GB │ IE
15

Publicidad

Tabla de contenido
loading

Tabla de contenido