Playback via Bluetooth
Pairing devices
Before you start using the radio for music playback via Bluetooth
pair it with a Bluetooth
♦
If necessary, briefly press the
Briefly press the SOURCE /
♦
activate the Bluetooth
the display
Connecting (if connections have been already saved).
♦
Set the external playback device so that it scans for Bluetooth
You can find a detailed description of how to do this in the operating instruc-
tions for your external playback device.
♦
From the list of discovered Bluetooth
external playback, select the entry SRH 5 C3. The external playback device
will now connect to the radio automatically via Bluetooth
a another beep when the connection has been successfully established and
BLUETOOTH Connected appears on the display
You can now use the radio to listen to music from your external playback device
wirelessly via the radio's speaker.
NOTE
►
In Bluetooth
15 minutes if no Bluetooth
►
The next time you turn on the radio, it will connect automatically to the
last-connected external playback device. If your external playback device
does not automatically reconnect to the radio, you will have to re-establish
the connection manually. You can find a detailed description of how to do
this in the operating instructions for your external playback device.
■
22
GB │ IE
│
®
-compatible external playback device.
®
button
button
function BLUETOOTH. You will hear a beep and
®
1
shows the message BLUETOOTH Pairing or BLUETOOTH
mode, the device switches itself off automatically after
®
connection is established.
®
2
to switch on the device.
3
(several times if necessary) to
devices in the settings menu of your
®
®
1
.
you must
®
devices.
®
. You will hear
SRH 5 C3