Scan Setting - SILVER CREST SRH 5 C3 Instrucciones De Uso E Indicaciones De Seguridad

Scan setting

The Scan setting function allows you to set whether all receivable FM radio
stations should be found during a scan or only radio stations with a strong
reception signal.
In FM radio mode, press the INFO / MENU button
♦
2 seconds. The following appears on the display Scan setting.
Press the VOLUME |
♦
Press the TUNE+
♦
ENTER / SCAN dial
Press the VOLUME |
♦
Saving your favourite stations
To store the current radio station manually, press the PRESET
♦
approx. 2 seconds. The display
radio station (if radio stations have already been stored). If no radio stations
have yet been stored, the display
Briefly press the TUNE+
♦
or turn the VOLUME |
preset.
Press the VOLUME |
♦
the selected preset. The display
NOTE
► Stored radio stations are overwritten if you store other stations in station
presets that are already occupied.
■ 20 GB │ IE
│
ENTER / SCAN dial
8 7
or TUNE− button or turn the VOLUME |
6
to select Strong stations only or All stations.
ENTER / SCAN dial
1
shows the preset with the last selected
1
shows Store preset 1: (Empty).
8 7
or TUNE−
ENTER / SCAN dial
ENTER / SCAN dial
1
shows Preset (1-40) stored.
4
for approx.
6
to confirm the selection.
6
to confirm the selection.
button 5
button (several times if necessary)
6
to select the desired
6
to store the station in
for
SRH 5 C3