ims PRO PULSFEED 4W Manual Del Usuario página 40

PRODUCT SETTINGS
INFORMATION
This menu provides access to version numbers of the boards and software.
PROCESS
This menu allows you to choose the welding process: MIG-MAG
PARAMETERS
The display mode gives access to more or less welding parameters and configurations.
- Easy: display and reduced functionality: no access to the welding cycle.
- Expert: complete display, allows to adjust the duration and time of the different phases of the welding cycle.
- Advanced: full display, allows to adjust the different arc voltages in each phase.
The name of the device and the possibility of customizing it.
Supported languages: French, English, etc
The Units of Measurement: International (SI) or Imperial (GB/USA).
Time, date and format.
Screen brightness
The cooling unit (AUTO / ON / OFF) and the PURGE function of the cooling unit:
- AUTO: activation during welding and deactivation of the cooling unit 10 minutes after the end of welding.
- ON: the cooling unit is permanently controlled.
- OFF: the group is disabled.
- PURGE
Product Reset (Partial / Total) :
- Partial (default value of the welding cycle).
- Total (factory configuration).
40
: function dedicated to purging the cooling unit or filling beams, the protections are then inhibited.
PULSFEED 4W
(GMAW) , TIG (GTAW) or MMA (SMAW)
EN