Tools Required; Parts Included; Need Help - Horizon Fitness ELITE T5 Guía De Ensamblaje

TOOLS REQUIRED:

F T-Wrench
F L-Wrench
F Phillips Screwdriver (not included)

PARTS INCLUDED:

F 1 Main Frame
F 2 Console Masts
F 1 Console
F 2 Water Bottle Holders
F 2 Handlebars
F 2 Main Frame Covers
F 2 Console Mast Covers
F 1 Polar Chest Strap (T7 only)
®
F 1 Hardware Kit
F 1 Safety Key
F 1 Power Cord
F 1 Audio Adapter Cable

NEED HELP?

If you have questions or if there
are any missing parts, contact
Customer Tech Support. Contact
information is located on the
back cover of this manual.
6
PRE ASSEMBLY
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place a
protective covering on your floor. Take CAUTION when handling and transporting this
unit. Never open box when it is on its side. Once the banding straps have been removed,
do not lift or transport this unit unless it is fully assembled and in the upright folded
position, with the lock latch secure. Unpack and assemble the unit where it will be used.
The enclosed treadmill is equipped with high-pressure shocks and may spring open if
mishandled. Never grab hold of any portion of the incline frame and attempt to lift or
move the treadmill.
WARNING
• DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill from
packaging until specified to do so in the assembly instructions. You may remove the
plastic wrap from console masts.
• FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
IMPORTANT NOTES
• During each assembly step, ensure that ALL nuts and bolts are in place and partially
threaded. It is recommended you complete the full assembly of your unit before
completely tightening any ONE bolt.
• Several parts have been pre-lubricated to aid in assembly and usage. Please do
not wipe this off. If you have difficulty, a light application of lithium bike grease is
recommended.