Horizon Fitness ELITE T5 Guía De Ensamblaje página 9

ASSEMBLY STEP 3
T7 SHOWN
D
4
C
3
1
HARDWARE FOR STEP 3
PART
B BUTTON HEAD BOLT
C SPRING WASHER
D FLAT WASHER
NOTE: Do not fully tighten bolts until step 6.
B
NOTE: Be careful not to pinch the console cable
while attaching the right console mast.
Pull the CONSOLE CABLE (3) away from the
A
treadmill base frame. Connect the CONSOLE
CABLE (3) from the MAIN FRAME (1) to the
CONSOLE CABLE (3) in the bottom of the
RIGHT CONSOLE MAST (4). The other end
of the CONSOLE CABLE should be located at
the top of the mast.
Open HARDWARE FOR STEP 3.
B
Attach RIGHT CONSOLE MAST (4) to MAIN
C
FRAME (1) using 4 BOLTS (B), 4 SPRING
WASHERS (C) and 4 FLAT WASHERS (D).
TYPE QTY
4
4
4
9