How To Use; Cleaner Description; Upright Cleaner - SSS AF6 Instrucciones De Operación

2. How to use

Cleaner description

2-1
1
2
3
5
4
7
16
15
13
2-2
B
A
ON-OFF switch
To turn cleaner ON, push switch (A) up.
To turn cleaner OFF, push switch down.
Note: To reduce the risk of electric shock,
this appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not change the plug in
any way.
To insure that the filter bag is inflated, plug
cord into electrical outlet and turn cleaner
ON. With handle in upright position, pull
back on handle until front of cleaner (B) is
lifted off the carpet.
Hose end must be firmly pushed into "cup"
in tool rack for maximum suction on floors.
6
6
8
9
10
11
12
14
2-3
Handle positions
The handle of your cleaner has three
positions; upright for storage and when
using cleaning tools; operating for
general operation on carpet and floors;
low for reaching under low furniture. Step
on handle release lever to lower handle.
3
17
18
3
19
The assembled cleaner will look like the
drawing.
1. Handle
2. ON/OFF switch
3. Cord hooks: wrap cord around
hooks for storage. The top hook can
be rotated for easy cord release.
4. Furniture nozzle
5. Dusting brush
6. Crevice tool
7. Tool cover
8. Bag door latch
9. Bag door
10. Final filter door (some models)
11. Stair cleaning handle
12. Hood
13. Carpet height control
14. Furniture protector: provides extra
protection for fine furniture.
15. Hose
16. Extension wand
17. Extra belt storage
18. Extra bag storage
19. Handle release lever
Operate cleaner only at voltage speci-
fied on data plate on bottom of
cleaner.
2-4
A
Transporting cleaner
To move your cleaner from room to
room, put handle in upright position, tilt
cleaner back on rear wheels, and push
forward (A).
The cleaner can also be moved by
lifting it as shown in (B).
B