Replacing Filter Bag - SSS AF6 Instrucciones De Operación

2-10
A
C
B. Select proper clean-
ing tool
A. Dusting brush may be used for
carved furniture, table tops, books,
lamps, lighting fixtures, venetian blinds,
baseboards, shutters, and registers.
B. Furniture nozzle may be used
for upholstered furniture, draperies,
tapestries, mattresses, clothing,
automobile interiors, and carpeted stairs.
C. Crevice tool may be used in tight
spaces, corners and along edges in such
places as dresser drawers, upholstered
furniture, stairs, and baseboards.
D. Wand is used to give extra length
to your hose. Attach it to any of the
above tools.
3. Maintenance
It is recommended that you change the
filter bag when dirt reaches the dotted
Disconnect cleaner from electrical
outlet before attempting to service it
in any manner.
Do not operate cleaner without either
cloth filter bag or paper filter bag in
place.
Cloth filter bag
When to replace
Check filter bag from time to time. It
should be emptied often. If the filter bag
is allowed to overfill, the cleaner will not
operate effectively.
3-3
Snap cap (C) into collar opening.
8
2-11
B
D
C. Attach wand and
tools
The tools are attached to the hose or the
wand in the same manner.
Push tool firmly onto hose; twist tool
slightly to tighten or loosen connection.
How to empty
Disconnect cleaner from electrical outlet
3-1
Removing bag door
Pull bag door latch forward and remove
door from cleaner.
3-4
Slide filter bag clip from bottom of bag.
2-12
How to attach tool cover
The tool cover is designed with a
"break-away" feature which allows it to
snap off if it is pushed open too far. To
reattach, align hinges of cover with slots
on front of tool storage area. Press
cover back into place.
3-2
B
A
Removing and installing filter
bag
Grasp filter bag collar (A) and pull collar
from tube (B).
3-5
Empty filter bag over paper, shaking
bag until clean.