Cutlery Rack Loading - KENMORE ELITE 722.1469 Serie Manual De Uso Y Cuidado

Loading Recommendations
The two trays in the cutlery rack are best suited for flatware and most cooking or serving utensils. They can also fit small prep
bowls and lids. The separators on the cutlery racks help keep flatware separated to avoid damage and improve cleaning.
NOTE: For best cleaning performance, place flatware in the silverware baskets. Heavily soiled utensils or items with baked on
foods should be placed in the middle rack or spoon basket for best performance.
Loading trays in low position
If the handles of your flatware are too thick, then reverse
the pieces so that the handles face the other direction.
Height Adjustable Trays
Each side tray can be adjusted independently to a high or low
position to accommodate utensils or cutlery of different sizes.
Remove dishes before adjusting the tray. Adjust each tray by
lifting it out and rotating it front to back.
Removing the Cutlery Rack
The entire cutlery rack can be removed if more space is
needed on the upper rack for larger items.
NOTE: Always remove the cutlery from the rack before
removing the rack.
Pull the rack out to the end of the rails. Then, lift the front of
the rack so that the rollers clear the stop on the end of the rail.
The rack can now be slid forward and removed from the rails.
WARNING: Be careful when loading and unloading items
with sharp edges. Load sharp knives with the blade down to
reduce the risk of injury.

Cutlery Rack Loading

Loading trays in high position
15