Brandson Equipment 304260 Manual Del Usuario página 14

Example 2:
To water once a day for 30 minutes, press the centre button till the LED glows at
the option of frequency: 24 hrs / Duration: 30 mins. The first watering cycle starts
after 7 seconds.
To make changes after the original settings:
• Settings are saved after 7 seconds if the centre button is not pressed again.
The LED light goes out within 60 seconds.
• The start time changes if the watering time is changed (different position
of the status LED). This means that the next watering cycle start time is
recalculated.
Delay function:
You can delay the cycle start time using the delay function. To do this, press the
centre button for about 3 seconds until all the LEDs glow continuously.
By pressing the middle button again, the start time can be delayed by 1 hr each
time the button is pressed.
The start time can be delayed by a maximum of 23 hours.
14
English