Example 3:
The current time is 8:00 a.m, your setting is Frequency = 24 and Duration = 15.
This means that watering is activated every 24 hours for 15 minutes. That is,
watering is activated every day at 8:00 a.m in the morning.
But if you want to activate the timer at 10:00 a.m every day, then the start time
has to be delayed by 2 hours. Now press the centre button for about 3 seconds
until all the LEDs glow continuously.
Then press the button again twice to delay the timer by 2 hours. The device then
starts the watering cycle with a delay of 2 hours at 10:00 a.m every 24 hours.
6. Manual operation
1.
To start manual watering, set the duration to ON.
2.
To stop manual watering, set the duration to OFF.
After finishing the manual mode, set the duration back to the desired settings.
English
15