HoMedics enviraScape BUDDHA Manual De Instrucciones Y Garantía página 7

Maintenance
To clean the pump:
Unplug from electrical outlet. Remove it from the base of the fountain. Use a small
brush or stream of water to remove any debris (Fig 1).
To keep water clean:
Periodically change water and clean the product according to the water condition.
Keeping the water clean prevents the water from becoming sticky and forming
microorganisms. We recommend distilled water to prevent mineral build-up.
To clean off hard water deposits on the base:
Use a mixture of vinegar and water to clean and remove any mineral build-up on the
base and pump.
Keeping the water at an optimum level:
Add water periodically to keep water level at an optimum level and to avoid shortening
the life of the pump. Note: Never let the pump run dry.
Fountain Storage:
Unplug the fountain from the electrical outlet, empty the water, and store in a dry,
cool place.
Note: Monthly maintenance will add to you pump's life.
Fig. 1
Front Plate
-
+
Impeller
Pump Inlet
Flow
Control
Lever
PVC Tubing
Inserts Here
Housing
Suction Feet
6
Back Plate