Emergency Stopping Of The Machine; Removing Of Stuck Linen; Electric Power Failure - Primus I35/50 Manual De Uso

4.11. EMERGENCY STOPPING OF THE MACHINE

Version OPL:
If the operator's safety or health is in danger, it is possible to stop the machine
by pressing the „emergency stop" or pushing the finger guard on the ironer´s stands (fig. 4.11.).
WARNING !
!
IMMEDIATELY AFTER CAUSES OF THE MACHINE STOPPAGE HAVE BEEN SOLVED, REMOVE LINEN
FROM THE MACHINE AND COOL DOWN THE ROLLER BELOW 80 BY TURNING IT MANUALLY OR BY
THE MACHINE DRIVE. FIRE HAZARD!

4.12. REMOVING OF STUCK LINEN

In case that linen has stuck in the machine, turn off the machine main
switch and use the crank which is placed on the machine right stand.
Lift the crank off and push in the opening.
When turning, press the crank towards the stand.
After the linen is free, loosen the crank and tip back
to the original position.
WARNING !
!
THE CRANK CAN CAUSE PERSONAL INJURY IF IT IS PUSHED AND ROLLER IS IN REVERSE OPERATION!

4.13. ELECTRIC POWER FAILURE

WARNING !
!
IF THE ROLLER TEMPERATURE IS HIGHER THAN 80°C, IT IS NECESSARY TO TURN THE ROLLER (USING
THE CRANK OR THE MACHINE DRIVE) TO COOL DOWN THE MACHINE. FIRE HAZARD!
When using the crank, see the chapter 4.12.
After the power supply is restarted, it is possible to start the machine immediately.
Version with coin meter: if the roller temperature is higher than 80°C after power supply restart, it is
necessary to press the button „Start" – by this the ironing roller drive is started, which avoid damage of
ironing belts (it is no need to insert any coins). When temperature drops bellow 80°C, the machine will stop
automatically.
12
Fig. 4.12.A
USER´S MANUAL
Fig. 4.11.
PUBLICATION DATE 10/03 508 816