Device Installation; 1.1. In A Control Panel - Urmet 1722/58A Manual De Instalación

1.

DEVICE INSTALLATION

Installation of the device must be carried out by a
skilled installer.
The product is designed to be powered according
to national system regulations.
The call sender device can be used to send audio-
video calls to an Android or iOS smartphone
This is done by establishing an Internet connection
through an ADSL router/modem or via 3G/4G using
a Cat5 cable or via Wi-Fi.
The device was designed for use in
homes and can be used to confi gure
only some network parameters. If may
consequently not work on specifi c
business IP networks.
The Urmet CallMe App must be downloaded to the
user's smartphone, connected to the Internet via a
mobile data or Wi-Fi connection, in order to be able
to receive the call.
Functions of the Urmet CallMe App include:
1. Intercom calls to other smartphones connected
to the same account;
2. Auto-on function ("Camera" function on the
CallMe app) to see the image taken from the
door unit.
3. Missed call list function.
Moreover, the Urmet CallMe App is necessary to
be able to confi gure the device parameters.
The Call Forwarding Device only works
in combination with one or more video
door phones available in the apartment
and is always confi gured as if it were a
video door phone with ID/code equal
to 3.
The Call Forwarding Device can be installed in one
of the following ways:
DS1722-111

1.1. IN A CONTROL PANEL

1. Insert the spacer behind the device in its special
seat, ensuring that it is locked by the lever A.
2. Insert the retainers B of the spacer in the DIN
rail in such a way that the terminal strips of the
device are pointing downwards, then insert the
retainers C.
3. Remove the terminal strip cover.
2
1
4. Connect the assembly to the system.
The end of a stranded conductor must
not be consolidated with mild soldering
in the points in which the conductor is
subject to contact pressure.
5. Carry out the device confi guration by means of
jumpers and/or dip-switches.
6. Replace the terminal strip cover.
7. Power on the device.
8. Complete your parameter confi guration by
using the Urmet CallMe App.
1
2
A
C
B
C
B
3
9