Installing The Tool-Less Rail Solution - Dell PowerEdge C1100 Procedimientos Iniciales Con El Sistema

3 Slide the system into the rack and tighten the thumbscrews to secure the
ears of system to the front of the rack.

Installing the Tool-less Rail Solution

WARNING:
To avoid injury, do not attempt to lift the system by yourself.
WARNING:
personal injury or damage to the system, you must adequately support the system
rack during installation and removal.
CAUTION:
Before installing systems in a rack, install front and side stabilizers
on stand-alone (single) racks or the front stabilizer on racks joined to other racks.
Failure to install stabilizers accordingly before installing systems in a rack
could cause the rack to tip over, potentially resulting in bodily injury under certain
circumstances. Therefore, always install the stabilizer(s) before installing
components in the rack.
CAUTION:
When installing rails in a square-hole rack it is important to ensure
that the square peg slides through the square holes.
Whenever you need to lift the system, get others to assist you.
The system is not fixed to the rack or mounted on the rails. To avoid
Getting Started With Your System
5