Sennheiser HME 45-6 Instrucciones Para El Uso página 7

Headset for connection to terminals in telephone exchanges and switchboards or
to conference and interpretation systems. The headset is supplied with open-ended
cable so that the user can choose the connector most suitable for the application.
Please refer to page 27 for the wiring diagram.
Headset for connection to terminals in telephone exchanges and switchboards or
to conference and interpretation systems. This headset is supplied with a 5-pin XLR
connector. Please refer to page 28 for the pin assignment of the XLR connector.
Headset for connection to terminals in telephone exchanges and switchboards or
to telephones with suitable socket (as per 121 TR 9-5 connection standard of the
German Telekom). This headset replaces the receiver and leaves your hands free.
Please refer to page 29 for the wiring diagram.
Headset with dynamic microphone. No external supply voltage necessary. The
headset is supplied with open-ended cable so that the user can choose the connector
most suitable for the application. Please refer to page 27 for the wiring diagram.
Connection of the HME 45
In the ideal case, your telephone is fitted with a suitable socket for connecting the
headset. Such a socket resembles the socket for the spiral cord of the receiver and
is unconnected. Some manufacturers use a headphone symbol for it, others the
designation „121 TR 9-5".
Connect the cable of your
HME 45 telcom headset to
this socket (see fig.
The receiver remains on the
cradle. You need it as a „switch"
at the beginning and the end
of your phone call.
to a telephone
telcom
).
HME 45-6
HME 45-C
HME 45
telcom
HMD 45-6
7