Sanus VLT5 Manual Del Usuario página 6

1.1 Select TV Screw Diameter
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M6 or M8) to use.
M6 M8
6
1.2 Select TV Screw Length
If your TV has a flat back AND you want your TV closer to the
wall, use the shorter screws.
Spacers and longer screws are supplied to accommodate:
● Round/irregular back TVs
● TVs with inset mounting holes
● Extra space needed for cables
FLAT BACK ROUND BACK
If your TV included inset spacers or wall mount
adapters, see Troubleshooting on PAGE 20.
INSET HOLES CABLES
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection, contact
Customer Service at
1-800-359-5520.
CAUTION:
Verify adequate thread
engagement with the screw or
screw/spacer combination.
-
Too short will not hold the TV.
-
Too long will damage the TV.
Too Short
Correct
Too Long