Publicidad
Idiomas disponibles
Idiomas disponibles
Assemble the CYLINDER (79) to the Cylinder caddy. See detail 8-A.
Attaching TYPE 1 fitting to the fuel outlet valve in detail 8-B.
Step
8
0utlet Valve
8-A Set CYLINDER (79) in the cylinder caddy with the outlet valve
facing the front of the grill. Tighten the cylinder hold down bolt
against the bottom cylinder collar.
8-A
79
Outlet
Valve
TYPE 1
Nipple
79
8-B Insert the TYPE 1 nipple of the regulator (27) into
the cylinder's fuel valve outlet as shown. Turn the
regulator hand wheel clockwise to tighten. No
tools are needed. The Hand wheel will come to a
complete stop when the connection is secure and
gas will not flow until a positive seal is achieved.
WARNING:
During assembly of grill and
when attaching or replacing the L.P. gas
cylinder, insure that the gas supply hose is
free of kinks and/or damage and is at least 3"
away from hot surfaces such as the grill
casting.
IMPORTANT!
T
O ENSURE PROPER GAS FLOW
CONTROL VALVES MUST BE
OPENING THE GAS CYLINDER VALVE
11412133 (Pg. 10)
8-B
27
,
BURNER
"OFF"
BEFORE
.
Publicidad
