Brita Redi-Twist Manual Del Usuario página 14

Helpful Hints
Installation of Auxiliary Faucet with Redi-Twist™ USS-301 and
USS-302 Systems
Before You Start
• Locate space in your cabinet to
secure water filter system.
• Check under the sink to locate a solid
wall surface to mount the filter system.
**FILTER SYSTEM MUST BE
MOUNTED IN A VERTICAL
POSITION**
• Position on cabinet wall to provide
easy access for future cartridge
change-outs.
• If you have anything other than
flexible hose under your sink, check
to see if you need to purchase
special fittings.
• Turn off cold water shut-off valve to
kitchen sink.
• Turn on cold water faucet on kitchen
sink to release water pressure.
• Be sure to have the correct size
compression cap to seal off the
spray hose connector stem.
Note: For systems with 1/4" water lines, you will need to purchase reducers and connectors to connect to this faucet.
Note: If you have an existing auxiliary faucet in place that you wish to use, it will require a faucet stem that connects to a
3/8" water line. Only a Brita® Auxiliary Faucet will provide certified reduction claims with the Brita® USS-301 and
USS-302 systems.
Note: This auxiliary faucet is also a replacement faucet for USS-323 system.
14
WARNING
Illustration is for USS-301 and USS-302 systems.
3/8" 3/8"