2. After soaking overnight, lightly scrub with soft bristle brush and liquid
detergent.
STORAGE
Store your juice extractor in a clean, dry place. Never wrap cord tightly around
the appliance. Do not put any stress on cord where it enters juicer, as this could
cause cord to fray and break.
OVERHEAT PROTECTION SYSTEM
Important: This appliance contains a PTC overheat protection system. When
the appliance is being operated for too long or with too much load, the PTC
protector will shut down the power of the appliance to protect the unit. If the
power shuts down, unplug for minutes and plug in for normal operation.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
Juice extractor is
Safety lock may not be
turned on but will
closed securely.
not run.
Appliance makes loud
Soft foods may have
noises and begins to
clogged the filter.
vibrate.
Motor seems to stall.
Juicing may be too
vigorous and/or pulp has
built up under the cover.
Pulp is too wet and not
May be pushing foods
enough juice is being
too quickly through the
extracted.
appliance.
Juice leaks between the
Juice pitcher may not be
juice pitcher and the lid
properly placed.
of the juice extractor.
Juicing action may be
too fast.
SOLUTION
Turn appliance to off
(0) and unplug. Check
that each part of
appliance is attached
correctly and all parts
are clean and free of
food remnants.
Turn appliance off (0)
and unplug. Remove
the filter and clean
with a brush to remove
all food particles.
Turn appliance off (0)
and unplug. Remove
the filter and clean
with a brush to
remove all food
particles. Clean lid
before replacing and
continuing to juice.
Use the pusher
as a guide; do not
use pressure. Turn
appliance off (0) and
unplug. Remove
the filter basket and
clean with a brush
to remove all food
particles. Soak the
filter in a solution of
hot water and lemon
juice (this will remove
excess fiber from the
strainer) or wash in
the dishwasher on the
top rack.
Make sure juice
pitcher is flush with
the appliance.
Slow down the juicing
action.