Sauder 414435 Manual Del Usuario página 12

Step 8
Fasten two ANGLE BRACKETS (5G) to the RAIL (R) as shown in the
å
upper diagram. Use two BROWN 7/16" LARGE HEAD SCREWS (6S).
NOTE: Be sure the BRACKETS are even with the short edges of the RAIL.
å
Fasten the RAIL (R) to the RIGHT END (A2). Use a BROWN 7/16" LARGE
å
HEAD SCREW (6S).
Fill the holes in the FRONT PANEL (F2) 1/4 to 1/2 full with GLUE (54M).
å
Then, insert a WOOD DOWEL (15F) into these holes. Wipe away the
excess GLUE.
Next, fi ll the holes in the RIGHT END (A2) 1/4 to 1/2 full with GLUE (54M).
å
Fasten the FRONT PANEL (F2) to the RIGHT END (A2). Push the WOOD
å
DOWELS into the holes in the RIGHT END. Wipe away the excess GLUE.
Fill the holes 1/4 to 1/2 full with GLUE.
54M
Page 12
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
54M
414435
5G
BROWN 7/16" LARGE HEAD SCREW
(3 used in this step)
15F
F2
A2
54M
5G
R
6S
R
Curved edge
15F
www.sauder.com/services