Make A Call From List; Storing And Recalling Phone Number - Pioneer DEH-P70BT Manual De Instrucciones

Section
08 Hands-free phoning
# If names have already been transferred by
phone book transfer function, name is displayed.
# If anonymous call is received, reception date
and time are displayed on received call list.
# You can also change the phone number by
pushing Multi-Control up or down.
3 Push Multi-Control right to display the
detailed list.
Pushing Multi-Control right displays the de-
tailed list that shows date, time, phone num-
ber and name.
# If name has not been entered, name is not dis-
played. To enter a name, refer to Entering name to
listed phone number on the next page.
# Pushing Multi-Control up or down displays
the detailed list sequentially.
# If you do not operate the list within about 30
seconds, the list mode is canceled automatically.

Make a call from list

It is possible to make a call from list. When
you want to redial, this function makes it ea-
sier.
1 Display the list and select a phone num-
ber.
Display the phone number you want to make a
call.
2 Push Multi-Control right to display the
detailed list.
Pushing Multi-Control right displays the de-
tailed list that shows date, time, phone num-
ber and name.
3 Press Multi-Control and hold to add +.
When you want to make an international call,
pressing and holding Multi-Control adds +.
# + can only be added when the detailed list of
Missed call, Dialled call or Received call is se-
lected.
46
En
All manuals and user guides at all-guides.com
# Pressing and holding Multi-Control again de-
letes +.
4 Press Multi-Control to make a call.
When a connection has been established,
start talking.
5 Press PHONE to end the call.
Pressing PHONE while talking ends the call.
The estimated total time for the call appears in
the display.
# The estimated total time in the display may dif-
fer from the actual total time.
Storing and recalling phone
number
If you press any of the preset buttons 16 you
can easily store up to six phone numbers and
later recall with the touch of a button.
1 Display the list and select a phone num-
ber.
Display the phone number you want to store
in memory.
2 Push Multi-Control right to display the
detailed list.
Pushing Multi-Control right displays the de-
tailed list that shows date, time, phone num-
ber and name.
3 Press one of preset buttons 16 and
hold until the beep sounds.
The selected phone number has been stored
in memory. The next time you press the same
preset button, the phone number is recalled
from memory.
Note
Up to 36 phone numbers (six phone numbers for
each of the five registered phones and guest
phone) can be stored in memory.