Adjusting Source Levels; Using Automatic Sound Levelizer - Pioneer DEH-P70BT Manual De Instrucciones

Audio Adjustments

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Use Multi-Control to select SLA.
SLA appears in the display.
3 Push Multi-Control up or down to ad-
just the source volume.
Each time Multi-Control is pushed up or
down, source volume increases or decreases.
SLA +4  SLA 4 is displayed as the source vo-
lume is increased or decreased.
Notes
! The MW/LW tuner volume level can also be
adjusted with source level adjustments.
! The built-in CD player and the multi-CD player
are set to the same source level adjustment
volume automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Using automatic sound
levelizer
During driving, noise in the car changes ac-
cording to the driving speed and road condi-
tions. The automatic sound levelizer (ASL)
monitors such varying noise and automati-
cally increases the volume level, if this noise
becomes greater. The sensitivity (variation of
All manuals and user guides at all-guides.com
volume level to noise level) of ASL can be set
to one of five levels.
1 Use Multi-Control to select ASL.
ASL appears in the display.
2 Press Multi-Control to turn ASL on.
Mid appears in the display.
# To turn ASL off, press Multi-Control again.
3 Push Multi-Control left or right to select
the desired ASL level.
Each time Multi-Control is pushed left or
right, ASL level is selected in the following
order:
Low (low)Mid-L (mid-low)Mid (mid)
Mid-H (mid-high)High (high)
Section
14
77
En