Entering Name To Listed Phone Number; Making A Call From The Preset List - Pioneer DEH-P70BT Manual De Instrucciones

Hands-free phoning
Entering name to listed phone
number
Use this name input feature to store names
into this units phonebook. Each name can be
up to 40 characters long.
1 Press LIST to display the phone book.
Press LIST repeatedly to switch between the
following lists:
Phone book  Missed call  Dialled call 
Received call
2 Push Multi-Control up or down to dis-
play the phone number in the phone book.
Pushing Multi-Control up or down displays
the phone number stored in the phone book.
3 Push Multi-Control right to display the
detailed list.
Pushing Multi-Control right displays the de-
tailed list that shows date, time, phone num-
ber and name.
4 Press Multi-Control and hold to display
the name input screen.
5 Press button 1, 2, 3 and 6 to select the
desired character type.
Pressing button 1 enables you to select alpha-
bet case (upper case or lower case) alter-
nately.
Pressing button 2 enables you to select num-
bers and symbols alternately.
Pressing button 3 enables you to select Eur-
opean characters and Russian characters al-
ternately.
Pressing button 6 enables you to switch char-
acter set between ISO8859-1 (European char-
acters) and ISO8859-5 (Russian characters)
alternately.
# Character sets cant be mixed.
6 Push Multi-Control up or down to select
a letter.
All manuals and user guides at all-guides.com
7 Push Multi-Control right to move the
cursor to the next character position.
When the letter you want is displayed, push
Multi-Control right to move the cursor to the
next position and then select the next letter.
Push Multi-Control left to move backwards in
the display.
8 Move the cursor to the last position by
pushing Multi-Control right after entering
name.
When you push Multi-Control right one more
time, the entered name is stored in memory.
9 To return to the standby display, press
BAND.
Making a call from the
preset list
It is possible to make a call from the preset
phone number list.
1 Use Multi-Control to select Dial preset.
Dial preset is displayed.
2 Press Multi-Control again to make a
call.
When a connection has been established,
start talking.
# You can also perform this operation by press-
ing OFF HOOK on the remote control.
3 Press PHONE to end the call.
Pressing PHONE while talking ends the call.
The estimated total time for the call appears in
the display.
# The estimated total time in the display may dif-
fer from the actual total time.
# You can also perform this operation by press-
ing ON HOOK on the remote control.
Section
08
47
En