Assembly; Parts You Are Receiving; How To Assemble The Sprayer - Swissmex 319310 Manual Del Operacion

ASSEMBLY

3.3
3.3.1

Parts you are receiving

189305 Solvents / 189310 Acetone sprayer:
- 1 Pump handle
- 1 Spray lance
- 1 Tank lid
- 1 Connecting rod
- Brochures
Inside the tank you will find:
- 1 Strainer
- 1 Dosing cup
- 1 Agitator
In a plastic bag you will find:
- 1 Adjustable nozzle with nut
- 3 Lock pin "C"
- 3 washers
- 1 Lock washer
- 1 Cotter pin or lock pin "R"
Compression sprayers:
- Complete tank with pump handle, pressure relief valve, hose and shut off
- 1 Spray lance
- 1 Adjustable nozzle (Solvents Mod. 319310, 320305, 322315)
- 1 Hollow cone spray tip with nut (Mod. Acetone 319305, 322310)
- 1 Flat fan spray tip with nut (Acids Mod. Acids 319315, 320310)
- Operator's manual

3.3.2 How to assemble the sprayer:

Compression sprayers:
1. Remove all the parts from the box and tank.
2. After removing the nozzle from the bag fix it in the spray lance.
3. Place the applicator upright on a table, assemble the spray tube with the gun and tighten firmly.
4. Your sprayer is ready to use.
1
Backpack sprayer:
1.- Take the loose parts out of the tank.
2.- Place the strainer on the filling port and then the tank lid.
3.- Insert the connecting rod in the pump tube placing one flat washer on each side, fix them with the lock pins "C".
2
3
3
Mod.
Mod.
189335
189310
Mod. 189335
Mod.
189310