Assembly; Parts You Are Receiving; 3.3.2 How To Assemble The Sprayer; Operation - Swissmex 319315 Manual De Operador

ASSEMBLY

3.3
3.3.1

Parts you are receiving

Compression sprayers:
- Complete tank with pump handle, pressure relief valve,
hose and shut off
- 1 Spray lance
- 1 Adjustable nozzle
- 1 Hollow cone spray tip with nut
- 1 Flat fan spray tip with nut
- Operator's manual

3.3.2 How to assemble the sprayer:

Compression sprayers:
1. Remove all the parts from the box and tank.
2. After removing the nozzle from the bag fix it in the spray lance.
3. Place the applicator upright on a table, assemble the spray tube with the gun and tighten firmly.
4. Your sprayer is ready to use.
1

OPERATION

4.
Compression sprayer:
Mix the solution in a separate container following the instructions of the product manufacturer.
Unscrew the pumping tube and remove it from the tank.
Pour the pre-mixed solution up to the indicated level marked in the tank.
Replace the pump tube and screw it tightly, then pressurize the unit.
Hold the sprayer by the handle or place it on the shoulder with the carrying strap and start applying.
Turn the nozzle to change the spray pattern (Solvent models 319310, 320305 & 322315).
2
3
3
MANUAL DE OPERADOR
PULVERIZADORES
DE COMPRESIÓN
MODELOS CON CAPACIDAD DE
1.3, 1.7, 2.4 Y 4 US GAL /
5, 6, 9,15 LITROS
Línea industrial de aplicadores de 1.3,
1.9, 2.3 Y 3.5 US GAL / 5, 7, 9,13.5 Litros ,
para ser usados principalmente en el
mercado de la construcción
especialmente para aplicación de
ACETONE.
MODELOS
319315, 320310
Impreso en México BNCONS EXP-0421
R00
4
NOTE:
The pump tube must be tight
firmly otherwise the applicator
will leak and will not hold
pressure.
NOTE:
To ensure the best performance
use only "SWISSMEX-RAPID"
original spare parts.